5100 MOBILE SURROUND MICROPHONE

The d:mension™ 5100 Mobile Surround Microphone is compact and easy to use. The mic combines stunning sound quality with a plug-and-play solution. It brings engaging surround ambience to sport events, documentaries and other HDTV productions. The mic requires no external signal processing.

This microphone is versatile. You can mount it in many ways: on a camera, microphone stand, suspended from the ceiling or via a hand grip. It is lightweight and portable. It can also withstand inclement weather conditions due to its robust nature.

The d:mension™ 5100 Mobile Surround Microphone is a completely self-contained plug-and-play solution for 5.1 audio capture. It uses five miniature pressure transducers. These transducers have low sensitivity to wind and mechanical noise, low distortion and low frequency response. They also have a large dynamic range. Appropriate channel separation and directionality is achieved by combining the use of DPA Microphones’ proprietary Directional Pressure Microphone (DiPMic™) technology with the use of acoustic baffles. DiPMic™ mounts interference tubes on the L/C/R omnidirectional capsules. Acoustic baffles preserve the accuracy of levels between the discrete analog output channels.

The three front microphones in this system are time aligned to eliminate comb filtering. This also ensures frequency consistency when down mixing to stereo or mono. In contrast, the rear microphones, with standard omnidirectional patterns, are optimally spaced from both each other and the front array to simulate the most natural time arrival differences. The LFE (0.1) channel is comprised of a L/R sum, which is then attenuated 10 dB in comparison with the signal from the main channels. This is in accordance with the 5.1 format.

The d:mension™ 5100 Mobile Surround Microphone provides a surround atmosphere that is rich, smooth and enveloping. It is great in its coherence, channel separation and localization accuracy.

The 5.1 output of the microphone runs through a multipin Lemo connector. This connector carries all six electronically-balanced channels. The microphone comes with a five-meter (16 ft), six-pair Mogami that cable breaks out to six Neutrik XLR-M connectors.


“As expected with DPA, the 5100 offers one smooth, silky-sounding array that can handle anything you put in front of it. [...] Whether indoors or out, rain or shine, songbirds or opera stars – you can capture it all with the 5100.”

 – Joe Hannigan, MixOnline 

Read the full review
 

 

Features

The product offers the following features
Plug-and-play solution
Lightweight and portable
Rich, smooth and fully enveloping sound
Discrete 5.1 analog output – no processing needed
 

WHAT'S IN THE BOX

d:mension™
1x
5100 MOBILE SURROUND MICROPHONE
 
Accessories
1x
LEMO MULTIPIN TO 6 X XLR-M, 5 M (16.4 FT)
 
Accessories
1x
THREAD ADAPTER FOR STEREO BOOM
 

DOWNLOADS

Typical frequency respose of a DPA 5100 at 0 degrees

RECOMMENDED ACCESSORIES

Specifications

d:mension™ 5100 MOBILE SURROUND MICROPHONE

Directional pattern
Directional
Principle of operation
Pressure, with interferece tube and separation baffles
Cartridge type
Pre-polarized condenser element
Frequency range
L, C, R, LS, RS: 20 Hz to 20 kHz; LFE: 20 Hz to 120 Hz
Frequency range, ±2 dB
L, C, R: 200 Hz to 16 kHz; LS, RS: 100 Hz to 12 kHz; LFE: 20 Hz to 120 Hz
Sensitivity, nominal, ±3 dB at 1 kHz
L, C, R: 26 mV/Pa; LS, RS: 28 mV/Pa
Equivalent noise level, A-weighted
L, C, R: Typ. 18 dB(A) (max. 21 dB(A)); LS, RS: Typ. 20 dB(A) (max. 23 dB(A))
Equivalent noise level, ITU-R BS.468-4
L, C, R: Typ. 29 dB (max. 32 dB); LS, RS: Typ. 31 dB (max. 34 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
L, C, R: Typ. 76 dB(A); LS, RS: Typ. 74 dB(A)
Total harmonic distortion (THD)
< 1% up to 123 dB SPL peak
Dynamic range
L, C, R, LS, RS: 103 dB; LFE: 100 dB
Max. SPL, peak before clipping
132 dB
Output impedance
50 Ω
Cable drive capability
100 m (328 ft)
Output balance principle
Active Signal balanced
Common mode rejection ratio (CMRR)
60 dB, 50 Hz - 20 kHz
Power supply (for full performance)
48 V Phantom power
Current consumption
Typ. 5 mA (max. 5.5 mA)
Connector
Lemo multipin
Color
Black
Weight
500 g (17.6 oz)
Microphone diameter
W: 240 mm (9.4 in), H: 140 mm (5.5 in), D: 195 mm (7.7 in)
Capsule diameter
5.4 mm (0.21 in)
Cable length
5 m (16.4 ft)
Cable color
Black
Cable diameter
9.3 mm (0.37 in)
Maximum output voltage
L, C, R, LS, RS: 1,8 Vrms / 2,5 Vpeak; LFE: 1 Vrms / 1,4 Vpeak
Polarity
Positive
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%
QR-Code