SURROUND KIT WITH FIVE D:DICATE™ 4006A, CLIPS AND WINDSCREENS IN PELI™ CASE

This is a complete Surround Kit with five carefully factory-matched omnidirectional microphones. Even though the standard tolerances on the d:dicate™ 4006A Omnidirectional Microphones are extremely low, the surround match is even closer.

The specially selected d:dicate™ 4006A Omnidirectional Microphones are matched within ±0.5 dB on both frequency response and sensitivity from mean of set.

The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphones make the d:dicate™ 4006A Omnidirectional Microphones the perfect choice for all AB Stereo, Decca Tree or surround main array recordings. The precise reproduction, total transparency and natural-sounding clarity of d:dicate™ 4006A Omnidirectional Microphones will provide you with a lifetime of satisfying listening.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.

Features

The product offers the following features
Wide pickup area and natural sound
Five carefully matched microphones
Ambience pickup with convenient directionality
Peli™ Case transportation and protection

WHAT'S IN THE BOX

 
d:dicate™
5x
4006A OMNIDIRECTIONAL MICROPHONE
 
Accessories
5x
CLIP FOR d:dicate™
 
Accessories
5x
FOAM WINDSCREEN Ø19 MM, LENGTH 56 MM (2.2 IN)
 
Accessories
5x
FREE-FIELD GRID FOR d:dicate™ 4006, SILVER
 
Accessories
5x
CLOSE-MIKING GRID, TRAPEZOID, SILVER
 
Accessories
5x
DIFFUSE-FIELD GRID FOR d:dicate™ 4003 and 4006, BLACK
 
Accessories
1x
PELI™ CASE FOR SURROUND MICROPHONE KITS
 

Specifications

d:mension™ SURROUND KIT WITH FIVE d:dicate™ 4006A, CLIPS AND WINDSCREENS IN PELI™ CASE

Directional pattern
Omnidirectional
Principle of operation
Pressure
Cartridge type
Pre-polarized condenser
Frequency range
10 Hz - 20 kHz
Frequency range, ±2 dB
10 Hz - 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz
40 mV/Pa; -28 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 27 dB (max. 29 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 79 dB(A)
Total harmonic distortion (THD)
< 1% up to 139 dB SPL peak
Dynamic range
Typ. 124 dB
Max. SPL, peak before clipping
146 dB
Switchable attenuator, filters etc.
0 dB / -20 dB
Output impedance
200 Ω
Minimum load impedance
2 kΩ
Cable drive capability
100 m (328 ft)
Output balance principle
Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)
> 60 dB
Power supply (for full performance)
48 V Phantom power (± 4 V)
Current consumption
2.8 mA
Connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color
Matte black
Weight
163 g (5.7 oz)
Microphone diameter
16 - 19 mm (0.6 - 0.75 in)
Capsule diameter
16 mm (0.6 in)
Microphone length
170 mm (6.7 in)
Maximum output voltage, RMS
8 V
Polarity
+V at pin 2 for positive sound pressure
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%
Matching tolerance (frequency response and sensitivity)
±0.5 dB
Phase deviation for kit
< 5°
QR-Code